Back to Top

Lab Gruppen FP 10000Q - 10,000W 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control for Touring ApplicationsLab Gruppen FP 10000Q - 10,000W 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control for Touring Applications

SKU: 000-FC901-00010

Be the first to write a review!

Out of Stock - Available to Order

Write a review

£3,758.04

£3,131.70 (Ex VAT)

The Lab Gruppen FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is the now proven technological milestone that is Lab Gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q.

• 10,000 Watt, 4-channel amplifier with up to 2,500 Watts output per channel and NomadLink network for monitoring and control
• Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
• 4 x 2,500 Watts into 2 Ohms, 4 x 2,100 Watts into 4 Ohms, 4 x 1,300 Watts into 8 Ohms, 4 x 660 Watts into 16 Ohm
• Proven and reliable Class-TD output stage delivers Class A/B audio quality with Class D efficiency
• Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
• Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
• Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
• Efficient Intercooler copper cooling system dissipates more heat for extended peak output
• 4 x balanced analog audio inputs on Neutrik XLR connectors
• 4 NL4 Neutrik speakON output connectors
• Removable dust filter grilles for increased air circulation
• Rugged 2U rackmount chassis for durability in touring applications

Sections

£3,758.04

Technical Specification

  • GENERAL
  • Number of channels4
  • Peak total output both channels driven10000 W
  • Peak output voltage per channel150 V
  • Max. output current per channel50 A peak
  • MAX OUTPUT POWER (Per ch. - both ch.'s driven)
  • 2 Ohms2500 W
  • 4 ohms2100 W
  • 8 ohms1300 W
  • 16 ohms660 W
  • PERFORMANCE WITH GAIN: 35dB and VPL: 150 V
  • THD 20 Hz - 20 kHz for 1 W<0.1%
  • THD at 1 kHz and 1 dB below clipping<0.05%
  • Signal To Noise Ratio>112 dBA
  • Channel separation (Crosstalk) at 1 kHz>70 dB
  • Frequency response (1 W into 8 ohms) +0/-3 dB6.8 Hz - 34 kHz
  • Input impedance20 kOhm
  • Common Mode Rejection (CMR)>54 dB, 20 Hz to 20 kHz
  • Output impedance @ 100 Hz32 mOhm
  • VPL MAX OUTPUT
  • VPL, selectable per ch.150, 121, 101, 83, 70, 56, 47, 38 V
  • VPL, selectable when bridged300, 242, 202, 166, 140, 112, 94, 76 V
  • Voltage Peak Limiter mode (per ch.)Hard / Soft
  • GAIN AND LEVEL
  • Amplifier gain selectable (all channels)23, 26, 29, 32, 35, 38, 41, 44 dB
  • Default gain35 dB
  • Level adjustment (per ch.)Front-panel potentiometer, 31 position detented from -inf to 0 dB
  • CONNECTORS AND SWITCHES
  • Input connectors (per ch.)3-pin XLR, electronically balanced
  • Output connectors (per ch.)Neutrik speakON or Binding Posts (must be specified upon order)
  • Output bridge mode per two ch.’sA+B - Ch. A is signal input source
  • NomadLink networkOn board, 2 x RJ45 etherCON® connectors, IN and OUT
  • Intelligent fans (on/off)Yes, depending on presence of output signal
  • Power on/off and Remote enable on/offIndividual switches on front-panel
  • CoolingTwo fans, front-to-rear airflow, temperature controlled speed
  • FRONT PANEL INDICATORS
  • CommonNomadLink network; Power Average Limiter (PAL); Power on
  • Per channelSignal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL); Very High Frequency (VHF); High temperature; Fault; Mute
  • POWER
  • Operating voltage, 230 V / 115 V nominal130-265 V / 65-135 V
  • Minimum power-up voltage, 230 V / 115 V171 V / 85 V
  • Power Average Limiter (PAL)Yes
  • Soft start / Inrush Current DrawYes / max. 5 A
  • Mains connector230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
  • PHYSICAL
  • DimensionsW: 483 mm (19”), H: 88 mm (2 U), Overall D: 396 mm (15.6”), Mounting D: 358 mm (14.1”)
  • Weight12 kg (26.4 lbs.)
  • FinishBlack painted steel chassis with black painted steel / aluminum front
  • ApprovalsCE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

Downloads

Shop With POLAR

  • PAYMENT

    Secure (SSL encrypted) payments with MasterCard, Visa, American Express and PayPal.

  • SHIPPING

    Standard 2-3 Day, Next Day and Saturday delivery options available.

  • EXCLUSIVITY

    As the exclusive UK distributor to some of the world’s top brands, you can trust that our products are authentic and direct from the manufacturer.

CONTACT US