Back to Top

Lab Gruppen E 20:4 2000 Watt Amplifier with 4 Flexible Output ChannelsLab Gruppen E 20:4 2000 Watt Amplifier with 4 Flexible Output Channels

SKU: 0105-ABO
EAN: 4033653091411

Be the first to write a review!

Available - Item in Stock

Write a review

£2,857.72

£2,381.43 (Ex VAT)

The Lab Gruppen E 20:4 has smart green credentials delivering low lifetime cost of ownership. Building on Lab Gruppen’s touring reputation for sonic excellence and rock-solid durability, E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio.

At the heart of E Series is Lab Gruppen’s IDEEA (IntelliDrive Energy Efficient Amplifier) technology. Based around a patented Class D variant output stage, IDEEA produces high power levels with very low distortion while drawing minimal mains current. Lab Gruppen’s proprietary Rail Sensing Limiter (RSL™), also exclusive to E Series, greatly reduces signal clipping to ensure high quality audio output at all times. User configurable for Hi-Z (70 V or 100 V) or Lo-Z, RSL senses rail voltages and optimizes each output for instantaneous load conditions. RSL settings also facilitate asymmetric loading of the channels to optimize performance and efficiency. Total available output power can be allocated among the channels as required by the application. This makes it possible, for example, to drive a small sub on one channel, a number of 70 V ceiling loudspeakers on the second channel.

Sections

£2,857.72

Technical Specification

  • GENERAL
  • Number of powered channels4
  • Total output all channels driven2000 W
  • Max output voltage per channel141 Vp / 100 Vrms
  • Max output current per channel16.3 Arms
  • Asymmetric load operationUnits are capable of delivering extra power to one channel while sending significantly less to the other
  • SENSITIVITY AND MAXIMUM OUTPUT POWER (ALL CHs DRIVEN)
  • 2 Ω load1 dBu: 500 W @ 45 V mode
  • 4 Ω load4 dBu: 500 W @ 45 V mode
  • 8 Ω load3 dBu: 500 W @ 70 V mode
  • 16 Ω load3 dBu: 500 W @ 100 V mode
  • 70 V load4 dBu: 500 W @ 70V mode
  • 100 V load4 dBu: 500 W @ 100 V mode
  • SENSITIVITY AND MAXIMUM OUTPUT POWER (SINGLE CH MAX)
  • 2 Ω load1 dBu: 500 W @ 45 V mode
  • 4 Ω load3 dBu: 1000 W @ 70 V mode
  • 8 Ω load4 dBu: 1250 W @ 100 V mode
  • 16 Ω load4 dBu: 625 W @ 100 V mode
  • 70 V load4 dBu: 1100 W @ 70 V mode
  • 100 V load4 dBu: 1600 W @ 100 V mode
  • PERFORMANCE
  • THD (20 Hz - 20 kHz @ 1 W into 8 Ω)<0.1%
  • THD @ 1 kHz, 1 dB below clipping<0.05%
  • Signal-to-noise ratio>106 dBA
  • Channel separation (crosstalk) @ 1 kHz>70 dB
  • Frequency response2 Hz - 40 kHz
  • Input impedance20 kΩ
  • Input common mode rejection, CMR50 dB
  • Output impedance25 mΩ
  • LIMITERS AND GAIN
  • LIMIT switch (per channel)3 positions: A, B and C
  • Max output voltage, LIMIT switch pos A (70 V)141 Vp / 100 Vrms
  • Max output voltage, LIMIT switch pos B100 Vp / 70 Vrms
  • Max output voltage, LIMIT switch pos C (Lo-Z)63 Vp / 45 Vrms
  • Gain in LIMIT switch pos A (70 V)38.2 dB
  • Gain in LIMIT switch pos B35.2 dB
  • Gain in LIMIT switch pos C (Lo-Z)31.2 dB
  • Level adjustment (per channel)Rear panel potentiometer, detented from -∞ to 0 dB
  • CONNECTORS AND SWITCHES
  • Input connectors (per ch.)3-pin detachable screw terminals, electronically balanced
  • Output connectors (per ch.)2-pin detachable screw terminals
  • High pass filterFixed at 50 Hz, switchable per channel
  • Power controlCan be used to go between standby and ON, unit will also enter standby automatically after 20 min of inactivity and resume when signal is present
  • GPI (power control input)Contact closure type, 2-pin detachable screw terminal, controls the power state
  • GPO (power state output)Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
  • CoolingFour fans, front to rear airflow, temperature controlled speed
  • POWER
  • Nominal voltage100 - 240 VAC
  • Power consumption600 W
  • Standby consumption<2.5 W
  • Mains connectorStandard IEC receptacle
  • PHYSICAL
  • Dimensions (HWD)44 x 483 x 417 mm (1.7 x 19 x 16.4")
  • Weight7.9 kg (17.4 lbs)

Downloads

Shop With POLAR

  • PAYMENT

    Secure (SSL encrypted) payments with MasterCard, Visa, American Express and PayPal.

  • SHIPPING

    Standard 2-3 Day, Next Day and Saturday delivery options available.

  • EXCLUSIVITY

    As the exclusive UK distributor to some of the world’s top brands, you can trust that our products are authentic and direct from the manufacturer.

CONTACT US