Avonic AV-CM44-VCUC-B

The Avonic AV-CM44-VCUC camera is designed for fixed installations. Without concessions on quality, this camera is an affordable choice for many installations. The camera is equipped with a high quality HD CMOS sensor combined with a high-quality glass lens with 5x optical zoom and a wide angle view of 83.7 degrees. Control this camera over RS232 with the Avonic CM-CON100 PTZ controller or any third party controller that supports VISCA, Pelco-P/D protocols.

ORDER YOURS NOW!
Features
Specifications
Downloads

  • High-quality wide-angle glass lens, 5x optical zoom and 83.7° horizontal angle view.
  • High SNR CMOS combined with digital noise reduction, the picture is clear even under low illumination (0.5 lux @ F1.8) conditions.
  • With 1/2.8”high-quality CMOS sensor (2.07 Megapixel) the camera has a resolution of 1920 x 1080p30 and achieves a picture of great quality.
  • USB 2.0 up to 1080p30.
  • Control the camera with common protocols: VISCA , Pelco-D/P via RS232. IR remote control included.
  • Up to 255 presets with 0.1° accuracy.

Video Formats: 1920x1080 / 1280x720 / 1024x768 / 800x600 / 640x480 / 320x240 / 176x144 p30/25/20/15/10/5

Sensor: 1/2.8”, HD CMOS, Effective pixel: 2.07M 16:9

Shutter: Auto, Manual

Scanning mode: Progressive

Lens: 5x optical zoom Iris F1.8-F2.8 Focal length 3.1-15.5 mm

Minimal Illumination: 0.5 lux (F1.8, AGC On)

White Balance: Auto, Manual, OnePush, 3000K-7000K in steps of 500K

Backlight Compensation: On, Off

Digital Noise Reduction: 2D, 3D

Signal/Noise: >55dB

Horizontal Angle of View: 20° (tele) - 83.7° (wide)

Vertical Angle of View: 11° (tele) – 53.5° (wide) Pan speed 0.1° - 60°/sec Tilt Speed 0.1° - 30°/sec

Horizontal Rotation: -170° - +170°

Vertical Rotation: -30° - +90°

Image Flip HV: Supported

Number of pre-sets: 255

HDMI output: Not available

SDI output: Not available

USB output: USB 2.0 video output, UVC standard

IP output: Not available

RS232 In/Out: 8pin Min DIN, Max distance: 30m, Protocol: VISCA/ Pelco-D/Pelco-P

RS485: Not available

Power Requirements: 12V / 1.5A

Power Consumption: 18W

Ethernet port: Not supported / For firmware updates

Camera Dimensions: 150x150x168.5mm

Camera Weight: 1.6 kg

Colour: Black

IR remote control: Included